Original Bapasco BP-04 3D Printing Pen Kids’ Best Education

Description

Original Bapasco BP-04 3D Printing Pen Kids’ Best Education

Description：

Features:
The 3D Pen for freehand drawing of 3D objects
0.6 mm Nozzle and Uses 1.75mm ABS/PLA Material
Ergonomic design for optimum handling
Adjustable output speed, Durability
In many paint colors: filament is changed easily by pressing a button
OLED indicator to check the operating temperature

Specification:
Input: AC 100V-240V
Output: DC 5V 2A (Can Be Charged By Mobile Phone)
Nozzle Diameter: 0.6mm
Output Materials Type: Fused Deposition Modeling
Molding Method: 3D Modeling
Printing Area: Unlimited
Color:Red/Yellow/Blue/White
Plug:EU
Sprinkle Speed: Adjustable
Material: Plastic case cover
Dimensions: 175 * 35 * 20 mm
Operation prompt:“←”means output materials ,“→”means return of material,“L”means mode tuning
High Temperature(high speed):210°
Medium Temperature(medium speed):200°

Low temperature(low speed):190°

Warning:

1. This Device Is Suitable For Use In Childre And Adults Aged 8 Or Above Below Can be Used!

2. Near The End Of the Pen nld For 3D High Temperature Danger Zone,It is Forbidden to touch the tip Position with the hand.

3. Prohibit the use of the pen touch on other hard objects, prohibit the use of a foreign body into the feeding hole or the nib.

4.When you need to replace the material, you will need to ensure that the supplies port level.

5. After use,please place the sale position,in case the upper air falls,the Child to play with the mouth.

Advantage：

Notes:
1.Only the light gets green,then Output Materials starting.
2.Avoid touching the nib.
3.You need to cut off a section when you start or finish  printing or the tube will be blocked.
4.You can cut off a section if the Output Materials does not go smoothly.
5.We will make a test before the shipping,so there may be some residues on the nib.